Curriculum/DP Design/A1.1 Ergonomics

Ergonomics | A1.1

Guiding questionHow do ergonomic considerations influence the design of a product?

Ergonomics is the first topic in the course for a reason. Every object you have ever used was built around an assumption about a body. Once you can name those assumptions, you start seeing them everywhere. The door you have to shove with your shoulder, the shelf you cannot reach without a stool, the phone that needs two hands when your last one needed only one: none of that is bad luck. Somebody chose a dimension, and in doing so somebody decided whose body it would fit.

What makes this topic useful, and not just interesting, is that it gives you evidence. Anthropometric data and percentiles let you argue that a handle is too small or a control is out of reach without saying "it feels wrong to me". That is exactly what examiners want in Paper 2, and exactly what your IA needs when you justify a measurement.

Ergonomics also carries real weight. The crash test dummy case in 1.1.3 shows that deciding whose body counts as "standard" has consequences well beyond comfort. Take the percentile logic seriously now, because it comes back in C1.2 Inclusive Design and anywhere else you have to defend a measurement.

Students must be able toDescribe how ergonomics is used to improve the design of a product by making a design more efficient, usable, functional, effective and safe.

Ergonomics (also called human factors engineering) is the study of how people interact with the products, systems and environments they use. When designers apply ergonomic thinking, the result is products that are safer, more comfortable and more efficient to use.

The field is built on three interlocking disciplines:

  • Anthropometrics - the measurement of human body dimensions. Knowing how large or small a user's body is allows designers to set appropriate dimensions for a chair, a control panel or a doorway.
  • Physiology - how the body's systems (muscles, nervous system, cardiovascular system) function, respond and reach their limits. Relevant when designing for force, fatigue, posture or sensory capability.
  • Psychology - how the mind perceives and interprets information from the senses. Relevant when designing interfaces, environments, warnings or anything that communicates through sight, sound, smell, taste or touch.

A product designed without ergonomic consideration may still function technically. It will be harder to use, more tiring, riskier or inaccessible to some users. Good ergonomic design removes that mismatch.

A practical way to apply ergonomics is to evaluate a design against the five qualities the IB syllabus identifies. Each describes a different way a product can fail to match the person using it:

QualityWhat it meansApplied example
EfficientReduces the effort, time or resources a user needs to complete a taskA chair adjusted so the user's elbows rest at desk height, eliminating shoulder elevation during typing
UsableThe product can be operated successfully by the target user population without specialist knowledgeTouchscreen buttons sized to at least 44 × 44 px so different finger sizes can tap accurately
FunctionalThe product performs its purpose without causing harm or requiring workaroundsA handle diameter chosen to fit the grip range of the target users so they can apply the required torque
EffectiveThe user achieves accurate and complete results when using the productA warning label that uses both colour and symbol, so users with colour vision deficiency still receive the message
SafeReduces the risk of injury or harm during intended and foreseeable useA machine guard preventing accidental contact with rotating parts during normal operation

Ergonomics applied: six product categories

The five qualities above are abstract until you see them in a real object. The categories below are the ones the course uses most often, and each one solves a different kind of body-to-product mismatch.

    Mr.K ergo chair
    Mr. K's Ergonomic Chair
  • Office chairs. Adjustable seat height lets the user place their feet flat on the floor with the thighs roughly parallel to the ground, which keeps the spine in a neutral position and reduces strain on the lower back. Adjustable lumbar support (support for the inward curve of the lower back) prevents slouching and takes pressure off the spinal discs. Adjustable armrests carry the weight of the arms so the shoulders can stay relaxed rather than raised.
  • Mr.K ergo mouse
    Mr. K's Ergonomic Mouse
  • Keyboards and mice. Wrist supports, split or angled key layouts and carefully placed mouse buttons reduce the awkward wrist angles that cause discomfort during long periods of typing. Less strain also means fewer errors and better productivity.
  • Medical devices. These are designed to reduce physical strain on doctors and nurses who use them for hours at a time, because a tired user makes more mistakes. Features that prevent accidental injury, such as needle guards and locking connectors, are part of the same thinking.
  • Automotive design. Seats, steering wheels and control panels are all shaped around driver comfort and reach. The clearest recent example is the head-up display (HUD), which projects speed and navigation information onto the windscreen so the driver reads it without looking away from the road. Connecting the HUD to a phone lets the driver deal with calls and messages without taking their hands off the wheel.
  • Consumer electronics. Phones, tablets and wearables are sized and weighted so they can be held and operated for long periods without the hand or wrist tiring.
  • Kitchen knives. A chef's knife should feel like an extension of the hand. Designers control weight distribution so the knife balances near the handle, giving the user more control and better accuracy. Lightweight, non-slip and textured materials improve grip, which matters most when the hand is wet.

Students must be able toExplain and use static and dynamic anthropometric data to design for different people and be able to discuss how factors such as age, gender, ethnicity and disability affect the anthropometric data.

Anthropometric data is the systematic collection of human body measurements - height, reach, grip diameter, shoulder width, eye height and hundreds of other dimensions. Designers use this data to set critical product dimensions.

The World Health Organisation, in its report Physical status: the use and interpretation of anthropometry (1995), calls anthropometry "the single most universally applicable, inexpensive and non-invasive method available to assess the size, proportions, and composition of the human body". Non-invasive means nothing enters the body: you are measuring a person from the outside, with a tape or a caliper, not with a scan or a blood test. That is why the method is used everywhere from hospitals to furniture factories.

Two types of data are collected:

  • Static anthropometrics (also called structural) - measurements taken with the body still: standing height, seated eye height, shoulder breadth, hand length, and distances between joints. This data is easy to collect because the subject is not moving. Used when designing furniture, clothing, vehicle interiors and equipment that must fit a stationary body.
  • Dynamic anthropometrics (also called functional) - measurements taken during movement: reach envelope, step length, grip force, reaction time, range of motion. This data is harder to collect, but it is often more useful, because it shows the range and the ease of the movements a user can actually make. Used when designing controls, handles, tools and spaces where the user must move to operate the product.
Interactive
Static or Dynamic?

Set up a person, then collect each type of data. Try two people of the same height but different ages, or give one of them limited shoulder movement after an injury or with arthritis: their static measurements match, but their dynamic ones do not.

Body proportions and movement ranges are typical rule-of-thumb values, for illustration

How the data is collected, and why it is not perfect

Measurements are taken with instruments such as calipers (a sliding measuring tool with two arms that close onto the body), tape measures, height gauges and, increasingly, 3D body scanners. Whatever the instrument, two things matter: it must be sturdy, and it must be calibrated, meaning it has been checked against a known standard so its readings can be trusted.

Some measurements are far more reliable than others. Height and weight are simple and repeatable. Body fat measured with skinfold calipers is much less reliable across a large sample, because the result depends on exactly where and how hard the technician pinches the skin. When you use a data table, it is worth asking how the numbers in it were obtained.

There is one convention that surprises most students. Anthropometric data is meant to describe the nude body, so that measurements from different studies can be compared. In practice, cultural expectations often make that impossible, so investigators measure clothed subjects and then subtract an allowance for the type and thickness of the clothing worn. Designers sometimes have to add an allowance back on, since a user wearing a winter coat or protective equipment occupies more space than the table says.

Factors that change the data

No two bodies are identical. A person tall enough to fit clothing size L may have arms that fit a size S. Designing for a single "standard human" always excludes real users. Anthropometric data must account for variation across:

  • Age - children and older adults differ significantly from young adults in reach, grip strength and mobility. Children are also a moving target, because they change size quickly.
  • Gender - on average, men are taller and heavier than women, a difference driven largely by hormones. Male bones are generally larger and denser: peak bone mass in men is roughly 50% greater than in women, and women lose bone mass faster as they age, so the gap widens over a lifetime. Women on average carry a higher percentage of body fat, which matters when interpreting health measures such as BMI. Products for a mixed population must accommodate both.
  • Ethnicity - body proportions vary across populations, so data collected from one group cannot be applied globally without adjustment. For example, people of African descent tend to have higher bone density and lower fracture rates than people of European descent, and measures such as waist circumference and waist-to-hip ratio differ meaningfully between ethnic groups.
  • Disability - users with physical disabilities may have reach ranges, grip capabilities or postures that change every dimension a designer must consider. Conditions affecting mobility, such as cerebral palsy or muscular dystrophy, produce body measurements that standard tables do not describe. Wheelchair users often have different upper-body strength and proportions from non-users, which changes both the reach envelope and the forces a product can ask for. See C1.2 Inclusive Design for how these differences shape design requirements.
Interactive
Where Do You Fit on the Curve?

Each curve shows how one measurement is spread across adult men and adult women in a region. Change the region to see the curves shift, then enter a measurement of your own to find its percentile.

cm
MenWomen

Heights come from measured national surveys collected in Wikipedia's Human height by country (see References). Europe and the global curve are population-weighted averages; the global curve covers the 15 most populous countries in that list. Foot and hand lengths are estimated from height.

Foot and hand lengths are estimates

Using anthropometric data in practice

A designer identifies which body dimension is critical for the product (seat height, grip width, overhead reach distance), selects the data table for the relevant user population, then determines which end of the distribution to design for. Whether the dimension is about reach or clearance controls the choice of percentile. The rules for that are covered in 1.1.3 Percentiles and 1.1.5 Work Envelopes.

Students must be able toIdentify where the 5th, 50th and 5th–95th percentiles are appropriate for a design scenario.

Anthropometric data for any dimension - such as standing height - follows a normal distribution (also called a Gaussian distribution, or a bell curve). Most people cluster near the middle; fewer people are at the extremes. Percentiles tell you what percentage of the measured population falls at or below a given measurement. Someone in the 70th percentile for a dimension measures the same as, or more than, 70% of the sample.

The statistics behind the curve

A normal distribution is described by just two numbers. The mean is the average value, which sits at the peak of the curve. The standard deviation (written with the Greek letter sigma, σ) measures how spread out the values are around that mean. A small standard deviation gives a tall, narrow curve, meaning most people are close to average. A large one gives a wide, flat curve.

The useful part is that the spread is predictable:

  • About 68% of the population falls within one standard deviation of the mean (mean ± 1σ).
  • About 95% falls within two standard deviations (mean ± 2σ).

This is why percentile tables work at all. Because the shape of the curve is known, a designer can convert "I want to include 90% of users" into two actual measurements in millimetres, taken from the table at the 5th and 95th percentiles.

A second useful piece of arithmetic concerns mixed populations. Within a single gender, the 5th to 95th percentile range covers 90% of people, because 5% are excluded at each end. In a mixed group that is half male and half female, the same range covers about 95% of people. Only the tallest 5% of men and the smallest 5% of women fall outside it, and since each group is half the sample, that is 2.5% + 2.5% = 5% excluded in total.

Three percentiles are used routinely in design:

  • 5th percentile - 5% of the population is at or below this measurement. A 5th percentile adult is among the smallest in the population. When designing for reach - how far a person must stretch to operate something - design for the 5th percentile: if the smallest person can reach it, everyone can.
  • 50th percentile - the median value; half the population is above and half below. Rarely the right choice on its own - a product sized only for the median excludes people at both extremes.
  • 95th percentile - 95% of the population is at or below this measurement. A 95th percentile adult is among the largest. When designing for clearance - how much space a person needs to fit through or under something - design for the 95th percentile: if the largest person fits, almost everyone fits.

Most products should be designed for the 5th–95th percentile range, covering 90% of the population. The extreme 5% at each end are excluded - a deliberate design compromise when the cost of accommodating them is too high.

Designing for the mean alone looks sensible but usually is not. Very few people sit exactly at the average, so a fixed dimension set at the 50th percentile fits almost nobody properly. The problem gets worse when the user group crosses age or gender boundaries, because there is no single average that describes both halves of the group. The crash test dummy case study at the end of this section shows how long that mistake can last once it is built into safety testing.

The choice of percentile range gets harder when the users are still growing. Computer furniture for primary school children has to cover a very wide 5th to 95th percentile range, across both genders and across several years of rapid growth. Get it right and the furniture encourages good posture, reduces fatigue and prevents long-term back problems. Get it wrong, and a child spends six years at a desk that does not fit them.

A useful heuristic when selecting a percentile: ask whether the dimension involves a person reaching towards something or fitting into something.

Design concernPercentile to useReasoning
Reach: how far a control or object is from the user5th percentileIf the person with the shortest reach can reach it, everyone can
Clearance: head height, knee room, corridor width95th percentileIf the largest person fits, everyone will
One-size product with a fixed dimension5th–95th rangeSet the minimum at the 5th and the maximum at the 95th to include 90% of users
Documenting a reference "typical" user50th percentileThe median is used as a reference point only. Do not use it to set fixed design dimensions that must fit a range of people
Interactive
Percentile Lookup Tool

Pick a body dimension, a population, and a target percentile. The tool looks up a value using the same 5th/50th/95th logic taught above.

Illustrative values for teaching purposes only, not measured data
Case Study
Hybrid II crash test dummies

The Crash Test Dummy

Fifty years of car safety tuned to the body of an average man.

Read case study →

Students must be able toExplain the reasons why designers choose adjustability and/or range of sizes for a product, and identify products that use one or both strategies.

No single fixed dimension suits everyone from the 5th to the 95th percentile, so designers have two strategies for fitting a range of bodies. They can make the product adjustable, or they can make it in a range of sizes. Many products use both.

Strategy 1: adjustability

An adjustable product has parts that the user can move, extend or lock into position to suit their own body. One product covers the whole range, and each user sets it up for themselves. This works best when several people share the same product, or when one person needs it set differently at different times.

  • An office chair with adjustable seat height, lumbar support and armrests lets a 5th percentile user and a 95th percentile user sit comfortably at the same workstation, one after the other.
  • A car's steering column and seat both adjust, so drivers of very different heights can share one car.
  • A bicycle saddle slides up and down its seat post to match the rider's leg length.

Adjustability has costs. Every adjustment adds parts, weight and a mechanism that can wear out or break. It also depends on the user: an adjustable chair only helps if the person sitting in it knows how to set it up, and many people never touch the levers.

Strategy 2: a range of sizes

A product made in a range of sizes comes in several fixed versions, and each user chooses the one closest to their body. Each size is simple, with no mechanism to adjust or break, but the manufacturer has to design, make, store and sell every size. This strategy works best when a product is personal, worn or used by one person, or when an adjusting mechanism would be impractical, too expensive or unsafe.

  • Clothing, sold in sizes such as those in the T-shirt chart below.
  • Crash test dummies: the Hybrid III family includes a 50th percentile male, a 5th percentile female and three child dummies; five sizes to cover a wider population range.
  • Bicycle helmets offered in S, M and L to fit different head circumferences.
Sample size chart for a T-shirt
SizeChest (cm)Length (cm)
XS8466
S9069
M9672
L10274
XL10876
2XL11478
3XL12080
4XL12682

A buyer measures their chest and chooses the closest size. Each step on the chart is 6 cm, so most people fall somewhere between two sizes. Someone with a 105 cm chest sits exactly between L and XL, and neither will fit them perfectly. That gap is what adjustment is for.

Using both strategies

Sizes and adjustment solve different parts of the same problem. The size gets the product close to the user's body, and adjustment closes the remaining gap. That is why so many products combine them.

  • A bicycle is sold in several frame sizes, because the frame fixes the distances between the saddle, handlebars and pedals, and no adjustment can change them much. Within each frame size, the saddle height, saddle position and handlebar stem then adjust to fine-tune the fit.
  • A sit-stand desk adjusts its height with a motor, but the same model is often sold with tops in several widths and depths, so it suits both the room it goes in and the work done at it.
  • The Aeron chair in the 1.1.5 spotlight comes in three frame sizes, and each one still has adjustable seat height, armrests and tilt.

Clothing combines the two strategies through small details that are easy to overlook. A drawstring lets one pair of tracksuit trousers fit a range of waists. Adjustable shoulder straps on a backpack or a pair of dungarees move the fit up or down the body. Elastic cuffs, a belt with several holes, the Velcro tabs at the wrists of a rain jacket and the toggles on a hood all let a garment bought in a fixed size be fitted to the person wearing it. The buyer with a 105 cm chest can choose the XL and use these features to take up the difference.

Widening the percentile range a product covers is sometimes called design for more types. It is a trade-off rather than a free improvement. Each extra bit of range costs money, adds mechanism or adds stock-keeping complexity, and the cost climbs steeply once you go beyond the 5th to 95th band. Users outside that band usually have to look for a customised solution instead.

Students must be able toExplain the importance of workspace envelopes, adjustability, reach and range of sizes clearance in relation to percentiles and how they are used when designing products.

When designing a workspace, whether it is a cockpit, a kitchen or a production line, a designer needs to map more than body size. They also have to map the space in which the body moves and operates. Three related concepts define that space:

Work envelope (workspace envelope) - the three-dimensional space that a person can comfortably reach and operate within from a fixed position. Imagine a sphere of reachable space around a seated operator. All critical controls must fall within this envelope; otherwise the user must stretch, lean or shift in ways that increase fatigue and error rate. The size of the work envelope changes with body size, so it must be defined using percentile data.

Reach - the maximum distance a person can extend their arm to contact or operate something. Reach is a 5th percentile design concern: if the smallest user can reach every control, everyone can. Place the most frequently used controls in the nearest zone of the work envelope.

Clearance - the minimum space needed to fit part of the body without obstruction: head clearance in a doorway, knee clearance under a desk, shoulder width in a corridor. Clearance is a 95th percentile concern: design so the largest user fits through or into the space, and everyone else will too.

Applying these correctly means using different percentiles for different problems: reach calls for 5th percentile data; clearance calls for 95th percentile data. A single percentile cannot solve both simultaneously. This is one reason adjustable workstations exist.

Why one percentile is never enough: multivariate variation

The usual rule for adjustability is to cover from the 5th percentile female to the 95th percentile male. That sounds like it guarantees 95% coverage, and it would, if human bodies were always in the same proportion. They are not. A tall person can have short arms; a short person can have proportionally long arms. Being 50th percentile for height tells you almost nothing about someone's shoulder width or seated eye height.

Multivariate analysis is the statistical method used to handle several body dimensions at once instead of one at a time. The uncomfortable finding it produces is this: when a product depends on several dimensions together, designing each one to the 5th–95th range still leaves more than 5% of people excluded on at least one dimension. Someone who fits the seat depth may not fit the armrest width.

Designers accept this rather than solve it, because the cost of accommodating every possible combination of dimensions rises very steeply and is rarely justified. What they can do is identify which dimension actually limits the design. In a workstation, that limiting factor is usually arm reach, which is why the reach envelope is defined as a three-dimensional space rather than a single distance.

Where the data comes from

Reliable data is essential before you can define a reach envelope for a broad population. Four sources are commonly used:

  • Anthropometric tables - published percentile data for a defined population.
  • Dynamic measurement - measuring real users while they move, which captures reach and range of motion that static tables miss.
  • Software simulation - digital human models placed into a CAD model of the workspace, so reach and clearance can be tested before anything is built.
  • Video analysis - traditionally measurements were taken by hand, but recorded video has proved an effective way to capture how people actually move through a task.

Every one of these can be distorted by clothing, which adds bulk and restricts movement. A reach envelope measured in a t-shirt does not describe the same worker in a padded jacket, gloves and a helmet.

Product Spotlight
The original Xbox 'Duke' controller

Xbox Controller Redesign

Built for one hand size, then rebuilt for everyone else.

Read spotlight →
An IKEA Mittzon adjustable standing desk

Adjustable Standing Desks

One height range, covered by a motor instead of a size chart.

Read spotlight →
Herman Miller Aeron office chair

The Aeron's Three Frames

When adjustment alone isn't enough, and you need three different frames instead of one.

Read spotlight →

Students must be able toExplain limiting aspects of user capabilities, including users' visual accuracy, colour perception, strengths, fatigue, muscle control and hearing thresholds.

Physiology is the study of how the body's systems function, respond and break down under use. For designers, the relevant question is: what are the limits of what the human body can do, and how does the product stay within those limits?

Visual accuracy and colour perception. The eye can only see fine detail at the very centre of the visual field, in a small area of the retina called the fovea. Everything outside that centre is peripheral vision, which detects movement well but detail poorly. Approximately 8% of males have some form of colour vision deficiency, meaning they cannot reliably tell certain colours apart. Designs that rely on colour alone to carry critical information (red = danger, green = safe) exclude these users. Good design treats colour as one channel among several, so that shape, symbol and position repeat the same message for anyone who cannot see the colour difference.

Muscle strength and fatigue. The force a person can exert (gripping, lifting, pushing) varies widely by age, gender, hand size and physical condition. Biomechanics is the study of the mechanical laws governing movement in living bodies: levers, joints and load paths. Designing a product that requires excessive force can cause injury over time. A rubber jar opener with a serrated strip works by increasing friction and mechanical advantage, allowing the same torque to be produced with far less hand force. This reduces fatigue and injury risk for users with reduced grip strength.

Muscle control. Fine motor control (precise finger and hand movements) decreases with age, fatigue, cold and certain medical conditions. Products requiring precise input, with small buttons or fine-tuned controls, can exclude users with reduced motor control.

Hearing thresholds. Human hearing is most sensitive in the 1,000–4,000 Hz range. High-frequency hearing loss is common with age. Auditory warnings must be designed to reach users with reduced hearing and must not be masked by background noise in the environment where the product is used.

Every design contains a biomechanical assumption

Whenever a designer specifies a control, they are quietly assuming something about the user's body. That a finger can press this button hard enough. That a wrist can twist this switch. That a hand can turn the handle of a can opener or a corkscrew. Those assumptions come from anthropometric data describing the population's strength, dexterity and fine motor control, and they are only as good as the population the data was taken from.

Several common conditions break the assumption. Age-related muscle weakness, arthritis (painful inflammation and stiffness of the joints), Parkinson's disease (a nervous system disorder causing tremor and slowed movement) and multiple sclerosis (damage to the nerves, causing weakness and loss of coordination) all reduce the force and precision a user can produce. Designers respond either by adapting the original design or by developing adaptive technologies, which are devices that amplify what the user's body can do rather than replacing it.

Packaging is where this fails most often. Older consumers regularly report difficulty with jar lids, soft drink bottle tops, ring pulls and child-resistant screw caps. Reduced grip strength and arthritis turn a task the designer never thought about into a daily obstacle. Better packaging, or a grip aid that supplies mechanical advantage, solves it cheaply.

A different biomechanical problem appears when equipment adds load to the body. Protective helmets are worn in many jobs and sports, and the neck muscles must resist that extra weight for hours. It becomes serious in military and search-and-rescue work, where night vision goggles or a head-mounted display are attached to the front of the helmet. The added mass sits forward of the neck joint, so it acts on a longer lever arm and multiplies the strain.

Biomechanics in sporting equipment

Sport is the clearest showcase for biomechanics, because equipment is refined to improve performance, reduce fatigue or prevent injury. Products are usually developed for elite athletes first, then mass-produced for everyone else.

  • Tennis racquets and golf clubs use more responsive materials, so more of the energy the athlete puts in is returned to the ball rather than absorbed by the frame or the arm.
  • Competitive swimsuits are engineered to create less drag through the water.
  • Javelins include damping technology that absorbs the vibration set up when force is applied sideways during the initial throw.

Biomechanical engineers work on far more ordinary products too, from backpacks to child safety harnesses, and they use the same analysis to investigate how a product is used, misused or found difficult. Applied across the whole population, including children, older adults and people with disabilities, this work becomes design for inclusion.

Designing around the limits of sight

Because vision carries most of the information a user receives, visual design has to be unambiguous: the right information, in the right place, at the moment it is needed, with nothing distracting around it. Designers are responsible for asking how the information will actually be used. A door that opens in only one direction should say push or pull, because nothing in the shape of a flat plate tells the user which is which.

Colour does several jobs at once, and it is worth separating them:

  • Appeal. Bright, saturated colours make a product stand out on a shelf; neutral colours suggest elegance and restraint.
  • Legibility. High contrast between text and background makes information readable, whether on packaging or a phone screen. Contrast checking tools let a designer test this numerically instead of guessing.
  • Inclusion. Choosing colour combinations that remain distinguishable to users with colour vision deficiency is a basic inclusive design move, and it costs nothing at the design stage.
  • Brand identity. Consistent brand colours build recognition, and specific colours carry learned associations: gold, silver and black are widely read as signalling luxury and exclusivity.
  • Context and safety. Camouflage patterns let clothing and equipment disappear into an environment. The opposite choice, high-visibility orange on lifeboats and life vests, makes equipment as easy to find as possible. Both are colour decisions driven by how the eye works rather than by taste.

Designing around the limits of hearing

Hearing is used deliberately in design for four main purposes:

  • Safety. Volume limiters, built into headphones as either software or hardware, cap output at a level considered safe. Separate limits are often set for children and adults, because long listening sessions at high volume permanently damage hearing.
  • Privacy. Soundproofing is applied to offices, bedrooms and studios to stop noise entering a space, leaving it, or both.
  • Alarms. The pitch, pattern and intensity of an alarm are engineered so the signal carries through the environment and reaches as many people as possible. Police and ambulance sirens, fire alarms and smoke alarms are all tuned to be heard and understood quickly.
  • Environments. Acoustic treatment of walls, floors and ceilings absorbs echo and reverberation. Without it, speech becomes hard to follow and music loses definition, whatever the quality of the sound source.

Thermal comfort

A person's experience of a given temperature depends on air temperature, humidity, air movement, radiant heat, clothing insulation, metabolic rate and individual physiology. Two people in the same room at the same thermostat setting may experience it very differently, depending on their clothing, activity level, body composition and acclimatisation. A single fixed temperature cannot satisfy all occupants of a shared space. Designers and facilities managers address this with zoned temperature controls, personal desk fans or heaters, and flexible dress codes. The underlying logic is the same as designing products in a range of sizes: no single fixed setting works for everyone, so the environment must allow for variation.

Students must be able toDiscuss how human senses (smell, sound, touch, taste and vision) are used to influence the design and development of products.

Psychology, in the context of ergonomics, focuses on how the mind receives and interprets information from the environment through all five senses. Products communicate through sensory channels whether their designers intend it or not. Understanding how the brain processes sensory input allows designers to communicate more clearly, create safer products and shape user experience.

Sight (vision). The most information-dense sense. Designers control colour, shape, size, contrast and motion to direct attention and communicate meaning. Orange is used for life rings, life vests and rescue equipment because it is the most easily detected colour against the sea surface and in low-light conditions. The choice is grounded in visual psychology. Text contrast ratios must meet accessibility standards to remain readable for users with reduced vision.

Space and visual boundaries also carry psychological weight. High partitions in an office create a sense of personal territory and acoustic privacy. Lowering them increases visual connection and openness but reduces defensible space, the zone a person perceives as their own and feels in control of. The term was coined by John Calhoun in the 1940s, and the amount of personal space an individual needs varies with culture and upbringing rather than being fixed. Designers balance these competing effects when planning shared environments such as open-plan offices and libraries.

Hearing (sound). Auditory signals carry urgency: a car horn, a fire alarm, a hospital monitor. The tone, pitch, rhythm and volume of a sound communicate different levels of emergency. A warning tone that blends with background noise fails its purpose. Sound design must account for the acoustic environment where the product is used.

Touch (haptic feedback). Textured surfaces, vibrations and physical resistance communicate information without requiring vision or sound. Tactile paving (the raised, bumped tiles at pedestrian crossings) signals a safe crossing point to visually impaired users by touch alone. Digital devices use haptic feedback to confirm input, guide navigation and signal alerts without requiring the user to look at a screen or hear a sound. See the concept introduction below for a full explanation.

Smell (olfaction). Natural gas is odourless; a sulphur compound is added to give it a distinctive smell because the brain responds rapidly to unfamiliar odours. Safety design sometimes uses smell as a warning channel when visual or auditory channels may be missed.

Taste. Less commonly a design consideration, but relevant in food products, medical devices (pill coatings designed to prevent accidental ingestion) and child safety (bitter coatings on hazardous household products).

Psychological data in product design: the mobile phone

Phones are a good example because the technology inside two competing models is often nearly identical. What differs is everything the user senses: colour, shape, material, surface finish, the weight in the hand, the way the screen lights up. Manufacturers vary these deliberately to appeal to different consumer groups. It is not only functions and services that sell a phone. Physical design choices aimed at a buyer's psychological needs, such as wanting to appear serious, playful, expensive or discreet, do a large share of the work.

Environmental psychology and the office

Environmental psychology studies the relationship between an environment and the people inside it. For an indoor office, five factors are usually assessed together:

  • Lighting - access to natural light and a view outside, plus adjustable task lighting so individuals can set the level that suits their eyes and their current task.
  • Acoustics - quiet spaces that protect concentration by removing distraction and interruption.
  • Air quality - usually handled by air conditioning, which controls ventilation, air movement and humidity and can filter pollutants. It introduces its own problems, though: draughts, uneven temperatures and fan noise.
  • Temperature - see the thermal comfort discussion in 1.1.6. Radiant temperature has the strongest effect on people, because the body absorbs heat directly from warm surfaces. Sustained high temperatures lead to heat stress and eventually heat exhaustion.
  • Worker density - how many people occupy a given area, and whether the space can be adapted and personalised to suit different working styles.

There is a widely used benchmark for judging the result. When about 80% of the occupants report feeling comfortable, the space is considered to have achieved "reasonable comfort". The figure is deliberately not 100%, because individual responses vary too much for that to be achievable. Note also that air temperature on its own is not a valid measure of comfort: all five factors above contribute.

Open-plan offices exist mainly to raise worker density and free up unrestricted space, by removing interior walls or shrinking partitions. The gains are real. Communication barriers drop, the space feels larger, and air and daylight move more freely. So do the costs: more noise transfer, less personal privacy and more visual distraction. The usual compromise is to use carefully placed low barriers to create defensible space within an open layout, so employees can still customise a small area and feel a degree of comfort, safety and control.

To measure any of this rather than guess at it, office designers can use the Physical Work Environment Satisfaction Questionnaire (PWESQ). It surveys staff on the environmental factors listed above alongside physical demands and work systems, and it turns a subjective argument about whether an office "feels bad" into data a designer can act on.

Key Concept
Haptic Feedback
Examples of haptic feedback in everyday devices

Haptic feedback is the use of vibration, force or texture to send information to a user through the sense of touch. The word "haptic" comes from the Greek haptikos, meaning "able to touch." Designers use it as a communication channel when visual or auditory feedback is unavailable, insufficient or would disturb others.

You already know haptic feedback
  • Smartphone notifications and silent confirmations. A phone vibrates to signal an incoming call, confirm a button press in silent mode, or alert you to a message. Without haptic feedback, pressing a touchscreen button gives no physical signal that the input was registered, leading to repeated presses or missed inputs.
  • Game controllers. A controller rumbles when a car hits a wall, a character takes damage, or a weapon fires. The PlayStation DualSense goes further: it can simulate surface textures by varying the vibration pattern as a character moves across different virtual materials.
  • MacBook trackpad. The trackpad on modern MacBooks does not physically move. A component called the Taptic Engine generates a precisely timed vibration that your finger interprets as a click. Place the trackpad on a table (preventing your hand from resting on the laptop body) and press: there is no movement at all. The "click" exists entirely as haptic feedback.
  • Lane departure warnings. Some cars vibrate the steering wheel when the vehicle drifts across a lane marking, delivering the alert through the driver's hands rather than through the eyes or ears. This is especially useful when the driver may have missed a visual warning.

When discussing haptic feedback in an IB context, consider both what it enables (confirmation without sound, navigation for visually impaired users, physical immersion in gaming) and its limits (the sensation is lost if the device rests on a surface rather than in the hand; not all users have full tactile sensitivity; cultural expectations around vibration vary).

Discussion
The Wrong Body

Every sensory or physiological design decision is really a bet about who the user is, and sometimes that bet is wrong. A red-green traffic light relies on colour vision that roughly 1 in 12 men don't fully have. A smoke alarm's high-pitched beep sits right in the frequency range that presbycusis (age-related hearing loss, a physiological decline) erodes first, making it least audible to the older adults most at risk from a house fire.

Pick a product you use every day and find the sensory or physiological assumption built into it. Whose body was it designed around? Who does that assumption quietly exclude, and which research method from A2.1 would have caught the problem before the product ever shipped?

Eleven questions covering all seven learning objectives. Select one answer per question, then click "Check all answers" to see your score and the explanations.

Q1 · 1.1.1 Ergonomics
A warning label is redesigned so that it carries its message through a symbol as well as a colour, so users with colour vision deficiency still receive it. Which of the five ergonomic qualities does this most directly improve?
Effective means the user achieves an accurate and complete result. Repeating the message through a second channel ensures the information actually reaches every user rather than only those who can distinguish the colour. Efficient refers to the effort or time a task costs, usable to whether the target population can operate the product at all, and safe to the risk of injury during use.
Q2 · 1.1.2 Anthropometrics
A designer measures how far a seated operator can sweep an arm sideways before the shoulder lifts. This measurement is:
Dynamic (functional) anthropometrics are taken while the body moves, and they capture reach envelopes, range of motion and step length. Static (structural) data such as seated eye height or shoulder breadth is taken with the body still. Dynamic data is harder to collect but usually more useful when designing controls, handles and workspaces.
Q3 · 1.1.2 Anthropometrics
Which statement best explains why there is no "average human"?
Body dimensions vary independently of each other. A person who is 50th percentile for height may be 80th percentile for shoulder width and 30th percentile for arm length. No single individual is average across every dimension at once, so a product sized for a fictional "average" person fits very few real people well.
Q4 · 1.1.3 Percentiles
A vehicle restraint system is developed and validated using crash data from a 50th percentile male only. What is the main design risk?
Designing around one mid-range figure tunes the product to a user who represents nobody but themselves. Restraint geometry, belt loading and airbag timing all depend on stature, seated height and mass, so an occupant well away from the reference figure sits outside the conditions the system was validated for. This is why safety-critical dimensions are set against a percentile range, and why the range has to be drawn from the population that will actually use the product.
Q5 · 1.1.3 Percentiles
A public library fits a fixed-height standing counter for its catalogue terminals. The counter cannot be adjusted, and users stand at it briefly. Which percentile should its working height be set to?
Clearances are set to the largest user and reaches to the smallest, but a fixed working height is neither. It is a dimension where being too high and being too low are both uncomfortable, so the error is shared rather than pushed onto one end of the population. Setting the counter at 95th percentile height leaves shorter users working at shoulder level; setting it at 5th forces taller users to stoop. The 50th percentile keeps the worst mismatch as small as possible. It fits nobody exactly, which is why an adjustable surface is preferred wherever the cost can be justified.
Q6 · 1.1.4 Adjustability
Which statement best explains why a designer would choose a range of sizes rather than adjustability?
A range of sizes suits products that are worn or consumed rather than shared between users, and products where a mechanism would add unjustified cost or complexity. Helmets and clothing are the standard examples. Adjustability is preferred where one product must fit several different users in turn, such as an office chair or a car seat. Neither strategy reaches 100% coverage.
Q7 · 1.1.5 Work Envelopes
A designer is setting the knee clearance under a desk and the distance from the seated user to an emergency stop button. Which percentiles are appropriate?
Clearance is a 95th percentile problem: if the largest user fits under the desk, everyone does. Reach is a 5th percentile problem: if the user with the shortest reach can hit the stop button, everyone can. A single percentile cannot solve both at once, which is one reason adjustable workstations exist.
Q8 · 1.1.6 Physiology
A rubber jar opener with a serrated metal strip helps users by:
The rubber increases friction between hand and lid, so less squeezing force is wasted on slipping. The tool also acts as a lever, since a larger radius produces greater torque for the same hand force. Together these let users with reduced grip strength open jars with far less effort, reducing fatigue and injury risk.
Q9 · 1.1.6 Physiology
An ergonomic keyboard with a wrist support and a split key arrangement is designed to reduce:
The split layout reduces the outward bending of the wrist that a straight keyboard forces, and the wrist rest reduces pressure on the carpal tunnel. Both address a physiological problem: repetitive strain caused by sustained awkward posture during extended use.
Q10 · 1.1.7 Psychology
A phone gives a short vibration when a touchscreen button is pressed. The main ergonomic purpose of this vibration is to:
A touchscreen gives no mechanical travel, so without haptic feedback the user has no physical signal that the press registered, which leads to repeated presses and missed inputs. Haptics supply that confirmation through touch, which is why they work in silent mode and for users who are not looking at the screen. Their limit is that the sensation is weakened if the device rests on a surface rather than in the hand.
Q11 · 1.1.7 Psychology
An Xbox controller contains small motors that vibrate in response to events on screen, such as an impact or the rumble of an engine. This is an example of:
The controller is delivering information through the sense of touch, timed to what the player is doing and seeing, which is what makes it feedback rather than decoration. Texture is a fixed property of a surface that the user feels passively, whatever the game is doing. Biomechanics concerns the forces and movements of the body itself, and anthropometrics is the measurement of body dimensions. Both matter to how the controller is shaped, but neither describes a signal sent back to the user.
Every Paper 2 question is attached to a product. Nothing here can be answered from memory alone: read the case study first, then answer the parts in order. The tariff tells you how many creditable points to make, and the command term tells you what kind of point counts. Write your answer before you open either panel, then mark yourself against the markscheme rather than against the example.
Question 1 · A1.1 · SL and HL6 marks
Case study

Tokyo Metro's 17000 series trains replaced the 7000 series, first introduced in 1974, on the Yurakucho and Fukutoshin lines in Tokyo. Seated passengers sit on long benches facing each other across the car. Standing passengers hold hand straps that hang from rails above the seats.

The 17000 series changed several dimensions from the cars it replaced. Each seat position on the bench is 460 mm wide, against 430 mm in the 7000 series. The hand straps above the seats hang 1660 mm above the floor. At the ends of each car the straps hang 80 mm lower, at 1580 mm, which the operator describes as a barrier-free measure, meaning one intended to make the train accessible to more people. Every car also has a free space for wheelchair and pushchair users.

Side view of a 17000 series car interior. Hand straps over a bench seat hang 1660 mm above the floor; straps at the car end hang 1580 mm above the floor. One seat position is dimensioned at 460 mm wide, against 430 mm in the 7000 series.
Figure 1: Hand strap heights and seat width in a Tokyo Metro 17000 series car

(a) State the percentile of standing grip reach that should be used to set the height of a hand strap, see Figure 1. [1]

(b) Outline why the width of each seat position was increased from 430 mm to 460 mm, see Figure 1. [2]

(c) Explain why the designers fitted hand straps at two fixed heights rather than straps that passengers could adjust, see Figure 1. [3]

Example answer

(a) The 5th percentile.

(b) The width of a seat position is a clearance dimension, so it has to be set from the upper end of the range, around the 95th percentile of hip breadth, or larger passengers spread into the next position. The 7000 series was designed in the early 1970s, and anthropometric data changes over time, so 430 mm was based on a smaller population than the one using the trains today. The extra 30 mm also allows for winter coats and for bags held on the lap.

(c) A strap has to be reachable by the shortest passengers who use it, so its height is set from the 5th percentile of standing grip reach. That still leaves out passengers below the 5th percentile, such as children and many older people. A strap low enough for them would hang at face height for taller passengers walking through the car, which is a clearance problem. Two heights solve this with a range of sizes: the straps over the seats suit most adults, the lower straps at the car ends serve shorter passengers, and each passenger chooses a height by where they stand. Adjustable straps would need a mechanism, which adds cost and parts that wear in a component that must hold a passenger's weight when the train brakes. In a crowded train there is also no time to adjust a strap before holding it, and every strap would be left at the last user's height.

Markscheme

(a) Percentiles aid in the selection of appropriate anthropometric data to satisfy the majority of a user population.
• 5th percentile ✓
• 5th percentile of the shorter user group, for example adult women ✓

Award [1] for the correct percentile up to [1 max]. Do not credit the 50th or 95th percentile, or a range.

(b) In design, consideration must be given to work envelopes, reach, clearance, adjustability and range of sizes.
• Seat width is a clearance dimension ✓
• Clearance is set from an upper percentile, such as the 95th, so that larger users fit ✓
• At 430 mm, passengers with a larger hip or shoulder breadth spread into the next seat position ✓
• Anthropometric data changes over time; the 7000 series dates from 1974 and adult body dimensions have increased since ✓
• Winter clothing and bags held on the lap add to the width each passenger needs ✓
• Wider positions reduce contact between neighbouring passengers, improving comfort ✓

Award [1] for each relevant brief point / summary of why the width of each seat position was increased on the 17000 series up to [2 max].

(c) To ensure products are appropriate to a range of percentiles, designers can choose to design products to be adjustable and/or to be produced in a range of sizes.
Range of sizes:
• Strap height is set from the 5th percentile of reach so that most passengers can reach it ✓
• Passengers below the 5th percentile, such as children, older people and some disabled passengers, need a lower strap ✓
• Two heights give a range of sizes, and passengers choose one by where they stand ✓
• Keeping the lower straps at the car ends keeps them clear of taller passengers moving along the car ✓
Adjustability:
• An adjustable strap needs a mechanism, which adds cost and parts that wear ✓
• A mechanism is a weak point in a part that carries a passenger's weight under braking ✓
• In a crowded car there is no time to adjust a strap before holding it ✓
• Each strap would be left at the previous passenger's height ✓
• Fixed straps need less maintenance across a large fleet ✓

Award [1] for each relevant reason / cause explaining why the 17000 series uses two fixed strap heights rather than adjustable straps up to [3 max]. Award a maximum of [2] where the response addresses only the range of sizes or only adjustability.

Question 2 · A1.1 · SL and HL6 marks
Case study

In an intensive care unit (ICU), each patient is connected to a bedside monitor that tracks their heart rhythm, blood oxygen, blood pressure and breathing. When a reading crosses a limit set by a nurse, or a sensor stops working, the monitor raises an alarm. Some alarms sound a tone. Others only show a message on the screen.

In March 2013, researchers at the University of California, San Francisco recorded every alarm from the GE Healthcare Solar 8000i monitors on 77 ICU beds for 31 days. The nurses responding to them work shifts of 8 to 12 hours. The researchers found that alarms were set off by events as harmless as a patient brushing their teeth.

Bar chart of alarms over 31 days on 77 ICU beds: 1 154 201 heart rhythm, 791 632 technical and 612 927 reading out of limits, 2 558 760 in total. 381 560 were audible, which is 187 audible alarms per bed per day. 88.8 % of 12 671 heart-rhythm alarms checked by nurses were false.
Figure 2: Alarms recorded on 77 ICU beds over 31 days, UCSF Alarm Study, March 2013

(a) State the human sense a nurse uses to detect the alarms that are not audible, see Figure 2. [1]

(b) Outline why the monitor uses an audible tone rather than an on-screen message for its most serious alarms, see Figure 2. [2]

(c) Explain how the monitor's alarms could be redesigned so that nurses hear fewer audible alarms without missing serious ones, see Figure 2. [3]

Example answer

(a) Sight.

(b) Hearing does not depend on where the nurse is looking. A nurse caring for another patient, or away from the bed, cannot see the screen, but can hear a tone from across the unit and respond straight away, where an on-screen message waits until someone happens to look at it.

(c) Nurses hear 187 audible alarms per bed per day across a shift of up to 12 hours, which causes fatigue, and because most heart-rhythm alarms are false they learn to treat the sound as meaningless. The number of alarms could be cut at the source by letting nurses set alarm limits to suit each patient and by adding a short delay, so that brief harmless events such as movement do not trigger an alarm. Alarms that do not need urgent action, such as a loose sensor, could be shown as on-screen messages or a light visible across the unit, which uses sight instead of hearing. The serious alarms that remain could use a distinct tone for each level of urgency, or vibrate a device carried by the nurse responsible, so that a nurse can recognise a serious alarm by hearing or touch alone without the whole unit being exposed to it.

Markscheme

(a) Psychology is concerned with the study of the human mind and involves the study of all the human senses that may be involved in sending information to the brain.
• Sight / vision ✓

Award [1] for the correct sense up to [1 max]. Do not credit hearing.

(b) Students must be able to discuss how human senses (smell, sound, touch, taste and vision) are used to influence the design and development of products.
• Hearing does not depend on where the nurse is looking ✓
• A nurse caring for another patient or away from the bed cannot see the screen ✓
• Sound carries across the unit, so any nurse nearby can respond ✓
• A tone attracts attention immediately, where a message waits to be noticed ✓
• A tone set above the background noise of the unit is heard over other activity ✓
• A distinct tone tells the nurse the alarm is serious before reaching the monitor ✓

Award [1] for each relevant brief point / summary of why the monitor's most serious alarms are audible up to [2 max].

(c) Physiology is the study of systems and biomechanics within the human body, their responses, limitations and capabilities, including fatigue and hearing thresholds.
Fewer alarms:
• Nurses set alarm limits to suit each patient, so fewer false alarms are raised ✓
• A short delay stops brief harmless events, such as movement, from triggering an alarm ✓
• Fewer false alarms means nurses treat each alarm as meaningful rather than learning to ignore them ✓
• Fewer audible alarms reduce nurse fatigue over a shift of up to 12 hours ✓
Using other senses:
• Alarms that are not urgent, such as a loose sensor, are shown as on-screen messages (sight) ✓
• A light visible across the unit shows which bed needs attention without sound ✓
• A device carried by the nurse responsible vibrates (touch), so only that nurse is alerted ✓
Keeping serious alarms noticeable:
• A distinct tone for each level of urgency lets a nurse judge urgency by hearing alone ✓
• Keeping sound for the serious alarms makes each tone stand out when it occurs ✓

Award [1] for each relevant reason / cause explaining how the Solar 8000i's alarms could be redesigned so that nurses hear fewer audible alarms without missing serious ones up to [3 max]. Award a maximum of [2] where changes are listed without linking them to the nurses' senses or capabilities.

Question 3 · A1.1 · SL and HL10 marks
Case study · part 1

A city food delivery company equips its riders with an electric bicycle and an insulated backpack. Riders work shifts of up to nine hours and complete between twenty and thirty drop-offs. The bicycle is shared: a rider is allocated whichever bike is charged at the start of the shift. (This company is invented for this question.)

The frame is supplied in one size. Saddle height adjusts over a 180 mm range by a quick-release clamp. The handlebar height is fixed.

Side view of the shared electric delivery bike. Labels: saddle height adjusts over a 180 mm range with a quick-release clamp; handlebar height fixed; phone running the delivery app, operated by touch, mounted on the handlebar; battery on the down tube; hub motor in the rear wheel. One frame size for all riders.
Figure 3: The shared delivery e-bike

(a) Identify two adjustments the shared bicycle would need in order to fit riders from the 5th to the 95th percentile, see Figure 3. [2]

Case study · part 2

The backpack is carried on the rider's back and loaded from the top. Full, it weighs 9 kg, and the load sits above and behind the rider's shoulders. Riders report pain in the lower back and shoulders towards the end of a shift.

(b) Outline why carrying the loaded backpack for a whole shift leads to pain in the lower back and shoulders. [2]

Case study · part 3

Riders work through winter evenings in rain and temperatures near freezing. The delivery application is operated on a phone clipped to the handlebar, using a touchscreen. Riders wear gloves.

(c) Describe how low temperature affects a rider's ability to operate the handlebar-mounted touchscreen. [2]

Case study · part 4

The company proposes replacing the plain dark jackets riders currently wear with a high-visibility kit: a jacket in fluorescent yellow with retro-reflective strips at the shoulders and wrists, and reflective bands worn at the ankles. Retro-reflective material sends light back in the direction it came from.

Two riders side by side. Left: the current plain dark jacket. Right: the proposed fluorescent yellow jacket with a retro-reflective strip across the shoulders, strips at the wrists and reflective bands at the ankles.
Figure 4: The current jacket and the proposed high-visibility kit

(d) Explain how the proposed kit uses the limits of human vision to make riders easier for drivers to see, see Figure 4. [4]

Example answer

(a) Saddle height, and handlebar height or reach to the handlebar.

(b) The 9 kg load sits high and behind the shoulders, so it pulls the rider backwards and the rider leans forward to stay balanced. The muscles of the lower back and shoulders hold that posture and carry the straps for up to nine hours without rest, and muscles held working in one position tire, so fatigue builds through the shift and turns into pain.

(c) Cold reduces the blood flow to the fingers, so the rider loses feeling in their fingertips and has less fine muscle control, which makes it harder to hit a small target on the screen accurately. Gloves worn against the cold make the fingertip larger and less precise, and ordinary gloves do not register on a touchscreen at all, so the rider must either take a glove off in the cold or miss touches.

(d) In daylight and at dusk, fluorescent yellow appears brighter than the colours around it and contrasts strongly with the greys and browns of a street, so a driver sees the rider from further away than they would see a dark jacket, which is close in colour to the road.

At night the eye's colour perception is weak, so the yellow alone no longer helps. The retro-reflective strips work instead: they send the light of a car's headlights back towards that car, so the rider appears bright to exactly the driver who is approaching. Because the strips are at the wrists and ankles they move as the rider pedals and signals, and movement catches a driver's attention. Placed at the shoulders, wrists and ankles they also mark out the shape of a person, so the driver recognises a cyclist rather than an unknown light.

Markscheme

(a) Consideration must be given to work envelopes, reach, clearance, adjustability and range of sizes.
• Saddle height ✓
• Handlebar height ✓
• Reach from saddle to handlebar ✓
• Brake lever reach from the grip ✓
• Saddle fore and aft position ✓
• Crank length ✓

Award [1] for each relevant adjustment identified up to [2 max]. Do not credit saddle height twice under two descriptions.

(b) Physiology is the study of systems and biomechanics within the human body, their responses, limitations and capabilities. Students must be able to explain limiting aspects of user capabilities, including strengths and fatigue.
• The load sits high and behind the shoulders, pulling the rider backwards ✓
• The rider leans forward to stay balanced, an awkward posture held for the whole shift ✓
• The lower back muscles work continuously to hold that posture ✓
• The straps press on the shoulders for up to nine hours ✓
• Muscles held working in one position without rest tire quickly, so fatigue builds through the shift ✓
• The load and the length of the shift together exceed what the muscles can sustain, causing pain ✓

Award [1] for each relevant brief point / summary of why carrying the backpack for a whole shift leads to back and shoulder pain up to [2 max]. Award a maximum of [1] where the response states only that the pack is heavy.

(c) Students must be able to explain limiting aspects of user capabilities, including users' visual accuracy, colour perception, strengths, fatigue, muscle control and hearing thresholds.
• Cold reduces blood flow to the fingers, so the rider loses feeling in the fingertips ✓
• Fine muscle control declines, so the rider is less accurate at small targets ✓
• Gloves make the fingertip larger and less precise on the screen ✓
• Ordinary gloves do not register on a touchscreen, so touches are missed ✓
• Shivering makes it harder to hold a finger steady on a target ✓
• Removing a glove to use the screen exposes the hand to the cold again ✓

Award [1] for each detail, leading to an account of how low temperature affects the rider's operation of the touchscreen, up to [2 max]. Credit effects on the hand or on the use of gloves.

(d) Students must be able to explain limiting aspects of user capabilities, including users' visual accuracy and colour perception, and discuss how human senses, including vision, are used to influence the design and development of products.
Daylight and dusk:
• Fluorescent yellow appears brighter than the colours around it ✓
• It contrasts with the greys and browns of a street, so the rider stands out ✓
• A bright, high-contrast colour is seen from further away than a dark one ✓
• The current dark jacket is close in colour to the road, so it is hard to see ✓
Night:
• Colour perception is weak in low light, so the yellow alone does not make the rider visible ✓
• Retro-reflective strips send headlight light back towards the car it came from ✓
• The rider therefore appears bright to the driver who is approaching ✓
Placement:
• Strips at the wrists and ankles move as the rider pedals and signals, and movement catches the driver's attention ✓
• Strips at the shoulders, wrists and ankles mark out the shape of a person, so the driver recognises a cyclist ✓

Award [1] for each relevant detail / reason / cause relating to how the proposed kit uses the limits of human vision to make riders easier for drivers to see up to [4 max]. Award a maximum of [2] where the response addresses daytime or night-time only.

Percentiles, Khan Academy
khanacademy.org/math/ap-statistics/density-curves-n…
Short explanation of percentiles and how to read a normal distribution. Worth ten minutes if the 5th, 50th and 95th percentile tables in 1.1.3 do not feel intuitive yet.
DINED anthropometric database, TU Delft
dined.io.tudelft.nl/en/database/tool
Free anthropometric data from Delft. Choose a population and a body measurement, and it returns the percentile values. Use this for real dimensions in your own projects instead of estimating.
Crash test dummy, Wikipedia
en.wikipedia.org/wiki/Crash_test_dummy
Covers the Hybrid III family and how long it took before a 5th percentile female dummy was used in routine testing. A concrete example of what goes wrong when a product is sized around 50th percentile male data alone.
Coblis colour blindness simulator
color-blindness.com/coblis-color-blindness-simulator
Upload any image and see it as someone with each type of colour vision deficiency does. The fastest way to check whether your design still works when colour alone carries the meaning.
Balancing Act, PhET Interactive Simulations
phet.colorado.edu/en/simulations/balancing-act
Drag masses along a plank and watch what balances. Supports the biomechanics in 1.1.6, including why a long handled jar opener needs less force from the hand.
Computer Workstations eTool, OSHA
osha.gov/etools/computer-workstations
A practical checklist for desk setup: monitor height, chair adjustment, keyboard placement, reach zones. Anthropometrics applied to a real workstation, and a good model for writing your own design specification.
Human height by country, Wikipedia
en.wikipedia.org/wiki/Human_height_by_country
Average adult height for men and women in over 100 countries, with the survey, age range and year behind each figure. The height curves in 1.1.2 are built from this table. Notice how much the method matters: some countries are measured, others are self-reported, and some samples cover only one age group.
Barrier-free targets and the Tokyo Metro 17000 series, Tetsudo Channel (Japanese)
tetsudo-ch.com/11323524.html/4
Source for the strap heights in Paper 2 Question 1: 1660 mm over the seats and 1580 mm at the car ends, lowered as a barrier-free measure. Published 27 March 2021, with a Tokyo Metro diagram of the car interior.
Tokyo Metro 17000 series unveiled, Norimono News (Japanese)
trafficnews.jp/post/99056
Source for the seat width in Paper 2 Question 1, which grew from 430 mm to 460 mm, and for the 7000 series dating from 1974. Published 11 August 2020.
17000 series introduction, Tokyo Metro press release (Japanese)
tokyometro.jp/news/2019/205131.html
The operator's announcement of the 17000 series for the Yurakucho and Fukutoshin lines, replacing the 7000 series, with a free space for wheelchairs and pushchairs in every car. Published 11 November 2019.
Insights into the problem of alarm fatigue with physiologic monitor devices, Drew et al., PLOS ONE (2014)
doi.org/10.1371/journal.pone.0110274
Source for Paper 2 Question 2 and Figure 2. Every alarm from the bedside monitors on 77 ICU beds at the University of California, San Francisco was recorded for 31 days in March 2013: 2 558 760 alarms, 187 audible alarms per bed per day, and 88.8 % of checked heart-rhythm alarms false. Open access.

Linking Questions

  • How are user-centred research methods used to collect human factor data? (A2.1)
  • Which aspects of ergonomics are appropriate for user-centred design (UCD) practice? (B1.1)
  • How does ergonomics affect modelling and prototyping of potential design solutions? (B2.2)
  • How important is ergonomics to inform effective inclusive design? (C1.2)